12x1600 Hydraulic 3 Roller Stainless Steel Metal Plate Cone Rolling Machine

一 、Machine model name：

1、model： 12×1600  Hydraulic Cone rolling machine

2、 image：（Style size is for reference only）

二、Main parameters ：

三、 Introduction to Machine Structure

The hydraulic control upper roller vertically adjustable plate rolling machine has a circular rolling function, and its main structure consists of main transmission device, upper roller device, and other components. The entire machine has a compact structure, reliable use, and convenient maintenance.

The lower roller of this machine is fixed in the position of the active roller, which is transmitted by the main motor through a set of couplings of the reducer to the input shaft of the main reducer model, and then transmitted to the two lower rollers through the output shaft to rotate the lower roller. The upper roller is the active roller, and its up and down movement is driven by the top hydraulic cylinder installed on the frame. When the rolled workpiece is tied, the upper roller moves to the middle position of the two lower rollers and rises to the set height. After unloading the workpiece, one working cycle ends.

When the upper roller moves downwards to press the plate, friction is generated between the plate and the stick, and the lower roller rotates to feed the plate. The three tangent points that come into contact with the metal plate through the three rollers can form an arc, and the degree of descent of the upper roller can be controlled to achieve the required radius of curvature of the arc.

3.1. Feed the metal plate into the center of the second lower roller, making sure that the side of the metal plate is perpendicular to the axis of the lower roller center.

3.2. After the upper roller descends to the appropriate position, drive the lower roller to curl the steel plate. Be careful not to detach one end of the steel plate from the other lower roller.

3.3. In the same process, the first curling is completed and repeated several times until the required curling diameter is reached.

3.4 Unloading:

(1) Move the upper roller lifting oil cylinder.

(2) Remove the rolled workpiece.

四、 List of Main Outsourced Parts

If you need a cone rolling machine or are interested in a cone rolling machine, please provide the material of the plate, the thickness of the plate, the diameter of the cone small opening, the diameter of the cone large opening, the vertical height or diagonal side length of the cone, and we will recommend a suitable machine model for you.